-Prof, I have to buy frames and mounted force for my work Serigraph or I can do?
"Well, today is very common that those who are dedicated to buy frames Screen printing already completed and ready to emulsify either wood or aluminum, and we have no idea as before, small workshops and some great, they made their own wooden frames and logic, the type of mesh mounted according to their needs.
In the 60's that was when I started in this, it took 2 people to tighten a wood frame (in fact there was no aluminum). A person stretched silk wet (it was the material that was used ) and another was hammering tacks to secure the seda.Posteriormente was changed tack by using staples, but with the tension the mesh was torn, so it was decided to put a strip of cardboard between the clamps and silk
-current use of staples still exists, but they are staples for upholstery, and put a thick strip of material between the clamp and the mesh, so the tension remains.
-With the advent of contact adhesives and glues of 2 parts (liquid and spray) results in better voltage stability and greater resistance to solvents and recyclers
- There are different types of mesh?
"Certainly, we must bear in mind that the basic principle of pattern is that the pressure exerted by the squeegee, squeegee, scraper, on the surface of the frame, ink travez happen to the areas not covered, and if the opening of the mesh is closed (this is determined by the number of threads cm. or inch) will not allow the ink covers the surface to be printed correctly, but on the contrary, if the mesh is very open, spend so much ink to be "dripping" the impression
"So there are inks heavier than others?
-Asi is the range of textile printing inks is very broad, and depending on the components of the ink itself is the consistency that will take and therefore the opening of the mesh will be different in each case
And as mesh will know that I choose?
"There's a basic chart of the different meshes and its application, give a click on the image to see it bigger
"I have some frames that are broken, if I buy the net, myself I can change it?
"Sure dale click the image and you will see a graphic sequence of like riding a mesh
-Prof, cleaning my frame was torn from one side, you can do something or should I change the screen?
"If it is too large, you can repair it so you do not miss the tension and not to do bigger, dale click the image and you will see a simple way
professional "Thanks, I'll try
0 comments:
Post a Comment